WISE

OFFERS

Leds

-In normal operation, indicate current signal strength

-IMPORTANT! since the received signal is reflected, it is not unusual for the signal strength to vary during operation

-LEDs also indicate when a signal is not present or when a base station is not allowing the access to the network

-Note that when viewed from the logo side of the CPE, the LED pattern is from right to left

Understanding cpe leds


1, 2, 4, 5 on & 3 flashing

Normal CPE boot


NO leds illuminated

No power to the CPE
-Check the connection on the bottom of the CPE
-Check the AC adapter
-Check the outlet for power


All LEDs Blinking Quickly

No connection between the PC and the CPE
The CPE will blink rapidly when power is applied but the PC is shutdown or disconnected


LEDs Blinking Slowly

CPE has found a suitable signal and awaiting registration.
Process should only take seconds.


LEDs Illuminated Solid

Normal operation
Signal strength is indicated by the number of green LEDs
CPE throughput is not influenced by the number of LEDs


LEDs Scanning (Chasing)

This is an indication that the CPE is searching for a signal.
If the scanning won't stop, the CPE is not getting a suitable signal and should be relocated or oriented differently.


1 and 5 on

Low power! return CPE for repair


2, 3, 4 on

High power! return CPE for repair


1 & 5 on & 2, 3, 4 oscillating

CPE over temp! reduce temperature